Kotobukiya has unveiled brand new pictures of their upcoming Ys VIII scale figures featuring Adol Christin and Dana Iclucia. First, they showed off the decomas (decoration master or painted prototype) of the red-haired swordsman, Adol. They previously gave a look at an unpainted prototype back in February, but now fans get to see him in his painted glory. Adol Christin’s figure is 1/7 scale and is will be available for pre-order starting June 18th.

You can check out pictures of Adol’s decomas below.

Next up is Ys VIII deuteragonist, Dana. Dana’s figure was announced back in September 2023, the same time as Adol. However, we have not seen a prototype of this figure, until now. Like Adol’s figure, Dana will also be 1/7 scale.

You can check out pictures of Dana’s unpainted prototype below.

What do you think of these figures so far?

SOURCE: Kotobukiya Official X Account (Adol Decomas, Dana Prototype)

The post Kotobukiya Shows Off Ys VIII Figures – Adol Decomas & Dana Prototype appeared first on oprainfall.

At Wonder Festival 2024 Winter, the huge event in Japan focusing on all things involving figures, Good Smile Company announced a plethora of things, and some of these involve the well known Fate series. I’m just going to focus specifically on the announcements pertaining to their Nendoroid line, those chibi figures that we all love so much. This time around, Good Smile Company had two new Nendoroids for the Fate series: Saber from Fate/Samurai Remnant,  and Kama from Fate/Grand Order. Based on the illustration they released for Kama, it seems the Nendoroid will be based on her first ascension (small version) outfit.

You can check out the announcement images for each Nendoroid below.

In addition to these brand new Nendoroids, Good Smile Company also provided an update for a Nendoroid they announced previously in July 2023. At the event, they unveiled an unpainted prototype for Baobhan Sith’s Nendoroid. Like Kama, Baobhan Sith is also from FGO. You can check out the prototype below.

If you’re interested in checking out the other Fate products Good Smile Company announced at WonFes 2024 Winter, you can check out the gallery at the Wonderful Hobby Life For You!! website. From there, you can filter the search results to any series you desire.

Fate/Samurai Remnant launched on September 29, 2023 for PlayStation 4, PlayStation 5, Nintendo Switch, and PC via Steam. Fate/Grand Order launched in Japan in 2015 for Android and iOS devices, and later released in North America in 2017. Are you interested in picking up any of these Nendoroids?

SOURCES: GSC Kahotan (Saber, Kama, Baobhan Sith), WHL4U Website

The post Good Smile Announces Nendoroids for Fate/Samurai Remnant’s Saber and FGO’s Kama appeared first on oprainfall.

At Wonder Festival 2024 Winter, a big event in Japan celebrating all things involving figures, Aniplex unveiled the unpainted prototype for their Fate/Grand Order x Usada Pekora collaboration figure. The figure is based on an illustration by Takashi Takeuchi and showcases Pekora wearing Mash Kyrielight’s armor and wielding her shield. Fans have been clamoring to have a look at the figure since its announcement, and now they get the chance.

You can check out a full body picture of the prototype below.

In addition, Amico of AmiAmi was able to take a video of the new prototype, in case fans wanted to get a better look at the figure. You can check that out below.

FGOコラボのぺこらさん#FGO #兎田ぺこら#WF2024W #アニプレックス#hololive pic.twitter.com/zFwYZiy44w

— あみこあみあみ (@amicoamiami) February 11, 2024

Fate/Grand Order first launched in Japan in 2015 for Android and iOS devices, followed by a release in North America in 2017.  Usada Pekora is a member of hololive’s 3rd generation who first debuted in July 2019. She currently has 1.6 million followers on X, and 2.42 million subscribers on YouTube. She served as the official ambassador for FGO Fes. 2023 which took place in July 2023. Are you looking forward to this figure’s eventual release?

SOURCES: Aniplex Plus X Account, Amico AmiAmi X Account

The post Aniplex Unveils Prototype for Fate/Grand Order x Usada Pekora Collab Figure appeared first on oprainfall.

Wonder Festival 2024 Winter is a large scale event taking place in Japan which celebrates all things involving figures. Many companies take the chance to provide updates to announced projects, and they also announce brand new products which fans can look forward to. Medicos Entertainment is one of these figure manufacturers. Back in September 2023,  Medicos revealed that they were making a scale figure for Kama of Fate/Grand Order. This figure would be utilizing her final ascension appearance.

For those that don’t know, when you raise the level cap of your Servant in FGO, this is known as ascending. Your Servant has three (3) different outfits: First Ascension, Second Ascension, and Third Ascension. First Ascension is unlocked right off the bat, Second Ascension is unlocked after you ascend your Servant once, and Third Ascension is obtained after ascending your Servant 3 times. Final Ascension is after you ascend your Servant 4 times, and this unlocks a special illustration for your Servant. So, Medico’s figure will be using Kama’s special illustration Final Ascension as the basis for their scale figure.

Before the end of 2023, Medicos revealed the data prototype for Kama, which is basically a digital mockup of what the figure may look like. Now, at WonFes 2024 Winter, Medicos Entertainment has unveiled a physical, unpainted prototype of the Kama scale figure. You can check the figure out in all of its glory below.

In addition, AmiAmi also took photos of the figure, which can give you some alternate angles. You can take a look at them below.

Fate/Grand Order first launched in Japan in July 2015 for Android devices, followed by a release on iOS devices in August 2015. The game then saw an overseas release in North America in July 2017 for both Android and iOS devices. Kama joined the Japanese version in March 2019 as a limited Servant.

SOURCES: Medicos Entertainment X Account, AmiAmi English X Account

The post Medicos Reveals 1st Prototype for Fate/Grand Order Kama Figure appeared first on oprainfall.

At Wonder Festival 2024 Winter, many companies are announcing new figures and providing updates some products they’ve announced previously. Good Smile Company is no different, as they too are taking part in this huge event celebrating all things involving figures. Of the many series they are making products for, Xenoblade Chronicles 3 is one of them. First of all , they had a new product announcement. They are working on producing a figma for one of the main characters of the game, Eunie. Not only did they just announce the figma, they even had an unpainted prototype ready.

You can check out the Eunie figma prototype below.

In addition to this announcement, they also shared a painted prototype of the Mio scale figure for the first time. You can check that out below.

AmiAmi also shared a video they took of the painted prototype. You can check that out below.

Mio from Xenoblade Chronicles 3 by Good Smile Company!! #Xenoblade #WF2024W #AmiAmiLive pic.twitter.com/Wwt5CAAVa5

— AmiAmi English (@AmiAmi_English) February 11, 2024

There are many more announcements and updates Good Smile Company made at WonFes 2024 Winter. If you’re interested at seeing all of them, you can check out their Wonderful Hobby Life For You!! website.

Xenoblade Chronicles 3 launched for Nintendo Switch on July 22, 2022. It was followed by an expansion, Future Redeemed, in April 2023. Will you be picking up either of these figures when they eventually release?

SOURCES: WHL4U Website, GSC Kahotan, AmiAmi English

The post Good Smile Announces Xenoblade 3 Eunie Figma, Reveals Painted Mio Figure appeared first on oprainfall.

Usada Pekora, member of hololive’s 3rd Generation, announced on X that she will be participating in a collaboration with popular mobile game, Fate/Grand Order.  Takashi Takeuchi, known for his work on both Fate/stay night and Fate/Grand Order, drew the collaboration illustration which depicts Pekora wearing the armor of Shielder (Mash Kyrielight). The illustration will also be exhibited at the Chaldea Satellite Station venue.

That’s not the end of the collaboration, as this illustration will be turned into a figure! This is certainly exciting news for fans of both FGO and Pekora. Information on the figure’s scale and its manufacturer have not been revealed at this time.

Usada Pekora is a VTuber who is part of hololive’s 3rd Generation. She has 1.5 million followers on X and over 2.4 million subscribers on YouTube. Prior to the figure announcement, Pekora served as the official ambassador of FGO Fes. 2023 which took place in late July 2023.

Fate/Grand Order is available now on Android and iOS devices and first launched in 2015 in Japan. The game celebrated its 8th anniversary in 2023.

SOURCE: Usada Pekora’s Official X Account

The post Hololive’s Usada Pekora Gets Fate/Grand Order Collab Figure appeared first on oprainfall.

Kotobukiya has announced a new figure is in production for Joshua Bright from The Legend of Heroes: Trails in the Sky. Based on the announcement image, the figure will utilize Joshua’s outfit from Trails in the Sky SC, similar to Estelle’s figure. The scale of the figure was not revealed, but based on the past Trails figures Kotobukiya has released and announced so far, it should be a 1/8 scale figure. A projected release time and prototype of the figure were not revealed.

Joshua joins a line of figures Kotobukiya has produced for the Trails series. Figures produced so far include:

• Rean Schwarzer
• Altina Orion
• Rixia Mao
• Crow Armbrust
• Renne Bright

Upcoming figures include:

• Emma Millstein
• Tio Plato
• Estelle Bright

The Legend of Heroes: Trails in the Sky SC first launched in 2006 for Windows PC in Japan and made its way overseas for both PlayStation Portable and Windows PC in 2015. It is the second game in what is known as the Liberl trilogy. The latest game in the Trails series for overseas fans, The Legend of Heroes: Trails through Daybreak, is scheduled to launch in Summer 2024 for Nintendo Switch, PlayStation 4, PlayStation 5, and PC.

The post Kotobukiya Announces Figure for Trails in the Sky’s Joshua Bright appeared first on oprainfall.

Kotobukiya has unveiled the painted prototype (decomas) for their latest Trails series 1/8 scale figure, featuring the SSS’ Tio Plato. The figure captures her design used in Trails from Zero instead of her more recent appearances in Trails of Cold Steel III – IV and Trails into Reverie. Previous scale figures Kotobukiya released for the series include: Rean Schwarzer, Altina Orion, Crow Armbrust, Rixia Mao, and Renne Bright. Figures for Fie Clausell and Emma Millstein are available to order but are not yet released. A figure of Trails in the Sky protagonist, Estelle Bright, is also in production.

You can check out the painted prototype of Tio’s figure below.

Orders for the Tio Plato 1/8 scale figure open on October 19. You can order the figure directly from Kotobukiya if you’re located in Japan or if by using a proxy. If you reside in the United States, you can order from Kotobukiya’s US store. For retailers in other countries, you can check out their list of international retailers. It should be noted that most of the Trails figures Kotobukiya has released have come with a bonus part. These parts are limited to Kotobukiya’s online store. So, if there is a bonus part for Tio’s figure and you want it, it would be best to order directly from Kotobukiya JP or its US storefront, if possible.

Will you be ordering Tio’s scale figure once orders open up? Are you happy with the design they chose? Let us know in the comments below!

SOURCE: Kotobukiya JP X Post

The post Kotobukiya Unveils Painted Prototype for Tio Plato Scale Figure appeared first on oprainfall.

A new figure has been announced for the heroine of the Atelier Ryza series. This one of Ryza is based on an illustration off of the first game’s premium box. The 1/6th scale figure is currently up for pre-order. You can take a look at the figure below.

The figure will currently be set to be released sometime next Winter. If you like you can also take a look at what we thought about the most recent game in the series.

SOURCE

The post New Figure For Atelier Ryza Up For Pre-order appeared first on oprainfall.

Some new nendoroids are up for pre-order today. One is the always hungry Pecorine from Princess Connnect: Re: Dive to go along with the rest of the Gourmet Guild. The other is Illya for the upcoming film Fate/kaleid liner Prisma☆Illya: Licht – The Nameless Girl.

The Pecorine nendoroid comes with a few accessories such as her princess sword and most importantly some food. The face plates included of course include one which shows her enjoying her meals. The figure is set to be  released sometime next Spring.

The Illya figure will include some accessories such as Ruby. Like usual a few different face plates will also be included. The figure is set to be released sometime early next year.

SOURCE: 1, 2

The post Two New Nendoroid Figures Up for Pre-order Today appeared first on oprainfall.

During the Hololive EN Panel: Day 1 at Anime EXPO Lite 2021, the members of holoMyth announced some new merchandise that would be coming soon. Among these announcements was the production of POP UP PARADE figures for all five holoMyth members (Mori Calliope, Takanashi Kiara, Ninomae Ina’nis, Gawr Gura, and Amelia Watson) by Good Smile Company.

In addition to the POP UP PARADE figure announcements, it was revealed that Gawr Gura will be receiving a Nendoroid. In case you were wondering, yes, her hood is removable. Prototype pictures of the Nendoroid are already available and can be seen below.

Anime EXPO Lite 2021 runs from July 3-4, 2021. You can purchase an online pass for the event for $5 HERE. All proceeds from the online pass sales will support the Hate Is A Virus commUNITY Action Fund.

If you just purchased an online pass but missed the Hololive EN Panel: Day 1, don’t worry, the panel will be available via VOD from July 5th until July 16th. The Hololive EN Panel: Day 2 is scheduled for July 4th at 2:15 pm PT.

You can follow each of the holoMyth members via the links below.

• Mori Calliope: Twitter, YouTube
• Takanashi Kiara: Twitter, YouTube
• Ninomae Ina’nis: Twitter, YouTube
• Gawr Gura: Twitter, YouTube
• Amelia Watson: Twitter, YouTube

Will you be picking up any of their figures once they’re available?

The post Hololive English Figures Announced, Gawr Gura Getting a Nendoroid appeared first on oprainfall.

Darkstalkers Pinstalkers round 1 pins are available now! You can get each pin for $15, and if you get the three pack you can get a new Demitri Darkstalkers Metal Card while supplies last. Each pin is hard enamel and between 2 and 3.75 inches.

PRESS EMAIL

DARKSTALKERS PINSTALKERS ROUND 1 PINS & DEMITRI METAL CARD AVAILABLE NOW!

The Night Warriors are HERE! UDON Entertainment is thrilled to present the first collection in a brand new series of Darkstalkers Collectible Pins! PINSTALKERS ROUND 1 features Demitri, Felicia, and Victor! Pick up the single pins or buy the 3 pack to secure a brand new DEMITRI DARKSTALKERS METAL CARD, while supplies last, available only at UDONPins.com!

Each PINSTALKERS COLLECTIBLE PIN is hard enamel & stands between 2 to 3.75 inches tall (yes, they are in scale to each other!) and feature screen print to enhance each character’s details! Each pin features 2 posts on the back for maximum security! Choose your fighter at UDONPins.com!

The post Darkstalkers Pinstalkers Round One Pins Available appeared first on oprainfall.

A new figure of Lyn from Fire Emblem (Fire Emblem: The Blazing Blade) is on the way. The 1/7th scale figure of Lady Lyndis is currently up for pre-order. The figure is based off of a work by Sachiko Wada, an illustrator for Fire Emblem: The Blazing Blade where Lyn made her first appearance.

The figure is currently set to be released sometime next November.

SOURCE 1, 2

The post Fire Emblem’s Lyn Dances in the Plains with New Figure appeared first on oprainfall.

Another Rent-A-Girlfriend figure is on its way. This one is of Chizuru which is now up for pre-order, has her in a Cheongsam dress. You can take a look at some images of the figure below. It is currently set to be released sometime next June.

In other news regarding the series, a second season of the anime was announced.

SOURCE 1, 2

The post New Figure of Rent-A-Girlfriend’s Chizuru Ready for Pre-Order appeared first on oprainfall.

A new figure is coming for the titular character of The Demon Girl Next Door. Currently up for pre-order, the figure of Shamiko has her in a swimsuit. The 1/7th scale figure will pair with an upcoming one of Momo.

The figure is currently set to be released sometime next July. In other news regarding the series, a second season is in production.

SOURCE 1, 2

The post Yuko From The Demon Girl Next Door Getting a New Figure appeared first on oprainfall.

Princess Connect! Re:Dive‘s Karyl is getting a nendoroid. The Gourmet Guild member’s figure is currently up for pre-order. The nendoroid comes with some accessories such her staff and some magical effects, along with some face plates such as a certain reaction she had to a certain dish.

The figure is currently set for a release sometime next May.

SOURCE

The post Princess Connect! Re:Dive Karyl Nendoroid Up for Pre-Order appeared first on oprainfall.

Good Smile Company have revealed a prototype for their upcoming scale Figure of Melia Antiqua as she appears in Xenoblade Chronicles: Definitive Edition. You can check out their official tweet along with a picture of the prototype below:

WonHobby Gallery 2020 AUTUMN Figure Update!

Good Smile Company
Xenoblade Chronicles: Definitive Edition
Scale Figure Melia Antiqua
(Prototype)

Virtual Exhibition: https://t.co/ANAcWlKIVx
Web Gallery: https://t.co/b652vtRlgb#xenoblade #goodsmile pic.twitter.com/l2BrPCLkMb

— GoodSmile_US (@GoodSmile_US) October 17, 2020

Since it’s a prototype, it is subject to change a little bit between now and when it releases but it gives us a good idea of what to expect. We still don’t know when pre-orders will open and how much it will cost, but this is still a release Xenoblade fans will want to keep their eyes on.

The post A Quick Look at Good Smile’s Melia Antiqua Figure appeared first on oprainfall.

A nendoroid of the titular character of Uzaki-chan Wants to Hang Out! is in the works. The figure is currently up for pre-order and is set to be released sometime next March. The nendoroid comes with three face plates and two different parts for her chest.

The anime is currently being aired on Funimation and AnimeLab.

SOURCE

The post Nendoroid for Uzaki-chan Wants to Hangout! On the Way appeared first on oprainfall.

A new figure of Priestess from Goblin Slayer is on its way. It is up for pre-order now will be available to order until this October. The 1/7th scale figure makes Priestess’ hat removable if you prefer that.

The figure is currently set to be released sometime next August. In other news regarding the series, the film Goblin Slayer -Goblin’s Crown- recently became available to view on Crunchyroll.

SOURCE

The post New Figure of Goblin Slayer’s Priestess Up for Pre-Order appeared first on oprainfall.

A figure of the master of teasing Takagi, from Karakai Jozu no Takagi-san is getting a nendoroid. The figure which up for pre-order now and comes with three face plates which of course will include a teasing expression. You can take a look at the figure below.

(The desk and chair accessories do not come with the nendoroid and are from Nendoroid Playset #01: School Life Set A and B)

The figure is currently set for a release sometime next Summer.

SOURCE

The post Get Ready to Be Teased by the Takagi-San Nendoroid appeared first on oprainfall.